case06-sketch

A UK athleisure brand came with a flat sketch for a full-zip jacket. We sampled, graded and prepared it for bulk at the 300-piece MOQ.

01 — A Sketch, Not Yet a Product

The client was a UK-based athleisure brand extending its training line into layering. They sent a two-view flat sketch: stand collar, front full zip, raglan sleeve seams, a cropped fitted hem, double-stitched cuffs. The intended use was training, outdoor wear and layering — a lightweight shell with breathable panels, not a heavy insulated coat.

What the sketch did not carry was everything that makes the style produceable. Fabric composition and weight were still open. Sizes would follow an approved size specification once the fit was locked. Color and branding were project-dependent, to be confirmed through RFQ and development. The brand had worked mostly with separates before, and a jacket adds failure points a legging panel does not: collar stand, zipper run, sleeve mobility across the shoulder, hem fit at the waist, cuff finish.

Their question was practical: can you take this drawing and turn it into a sample we can wear, measure and reorder?

02 — From Pattern to Locked Sample

Pattern off the sketch. We turned the flat sketch into a working pattern — collar stand, raglan panels, cropped hem, cuff and hem seam lines all mapped to sewable seam allowances. Grading was built around an approved size specification, rather than guessed from the sketch alone.

Fabric chosen for the layering role. Because the shell is lightweight and worn over separates, composition and GSM were confirmed after fabric selection rather than fixed on the sketch. We worked through the stock fabric library — more than 200 fabrics on hand — to assess lightweight, breathable options suited to training and layering. Fabric minimums run 300/600 m per color, and shade can be matched to Pantone or a lab dip as the project requires.

Sampling and fit review. A plain-sewn first sample takes 7–10 days on our side. The sample was reviewed on the stand and through wear: sleeve mobility at the raglan shoulder, the collar lying flat, the zipper running clean, the cropped hem sitting at the waist, and the cuff opening working as intended. Fit notes went back into the pattern, and the revised sample was checked again before the spec was locked.

Checkpoints before bulk. Incoming fabric is inspected for width, weight, shrinkage and colorfastness before cutting. Online inspection catches skipped stitches and seam placement during sewing. Final inspection runs to AQL 2.5, with colorfastness graded 4 under ISO 105 / European Standard methods and shrinkage held within 3%.

03 — Ready for Bulk at the Per-Style MOQ

case06-front

Once the sample was approved, the style moved into bulk at the per-style, per-color MOQ of 300 pieces. Bulk lead time runs 40–60 days from locked spec. Final inspection runs to AQL 2.5 against the approved sample and spec sheet.

Fabric composition and weight for this style are confirmed after fabric selection, and are recorded on the spec sheet once the final choice is made.

04 — Why This Case Is on Our Website

A jacket looks simple on a sketch. The work is in translating lines into seams, checking movement at the shoulder, and making sure the sample can be reproduced in bulk. This case shows that side of our work: we take a drawing through pattern, sample, grading and QC, at the same 300-piece minimum we quote on the site, without a large-volume commitment up front.

Brands that already sew separates often add a shell later. When that happens, the same development process applies — sketch to sample to bulk, with the decisions written down for the next order.

Want to develop your own athletic jacket from a sketch? Contact our export team or browse our product range. Explore our fabric library or read more before you order.